This is the AquaTune unit installed on a Harley-Davidson. Note that all Harley installations are typical like this. The unit has been mouinted closest to the distribution block using twin nozzles. Each nozzle was placed approximately 1/4 inch away from the fuel injactor. This assures precise injection throughout the power band. It is necessary to remove the intake manifold for the placement of the venturi nozzzles. Installation time on this application is approximately 3+ hours. Full instructions are provided with the kit. Photo courtesy of customer in Arizon
Introducing! Designed for the Harley-Davidson in mind, the new Micro-Thrust for all 4-cycle motorcycles, riding lawnmowers and most all gasoline generators, including motorized rickshaws. The MicroThrust unit produces 2.5L of hydrogen per minute at less then 1 amp. Unlike our automotive unit, the positive wire coming from the hydrogen generator MUST be installed with key on and engine run only. Not with continuous voltage. The black ground wire may hooked up directly to common ground. The MicroThrustPlus is one of our most powerful units that we have to date. It was specifically designed for horsepower, torque and, last but not least, fuel economy as well. This unit is smaller in size for a more compact install on motorcycles. This unit has "pinpoint degree adjustments", if needed. It allows the customer to "dial in" to their particular specifications.
We also have the MicroThrust. This unit is without the generator is applicable for motorized rickshaws. It still produces fuel economy and horsepower. This is considered more of a "high tech" water injection unit. Both units plummet combustion temps, increase engine longevity and also will not violate computer programming on the newer motorcycles. Drastically lowers emissions and oil temps by 25 degrees.
On most applications the price of this unit is $698.50 & shipping of $34.00 complete. Some applications will be less.