In this installation processor was, essentially, laid on top of the intake hose, the injection line coming out of the processor hasa sharp bend in it and thirdly, both the injection lines and the water lines were not cut to fit. Please also note, the white coloration of the water feed hose going to the processor, that it is white with calcium build-up. This is generally caused by the use of tap water rather than the recommended distilled water.
In this installation, the customer utilized a vacuum tee other than the factory supplied one. Secondly, the vacuum tee should have mounted close to the manifold and not to the PCV. Thirdly, the processor is too far from the point of entry. The coloration coming from the injection line is normal and should be seen with all AquaTunePlus units. This golden color indicates that the generator is properly being powered up.